Lectrosonics UCR195D Manuale Utente

UCR 195D DIVERSITY UHF RECEIVER OPERATING INSTRUCTIONS and troubleshooting guide LECTROSONICS, INC. Rio Rancho, NM

DIRECT SIGNALRECEIVERANTENNA USE AND PLACEMENT Position the antennas so that they are more than 3 or 4 feet from large metal surfaces. If this is no

Diversity UHF Receiver OPERATING INSTRUCTIONS 1. Connect the power cord or install the batteries. 2. Attach the antennas. 3. Connect the audio c

TROUBLESHOOTING POWER SUPPLY AND FUSE LEDs not lit or dimly lit • AC power cord disconnected. • External power supply disconnected or inadequat

Diversity UHF Receiver SERVICE AND REPAIR If your system malfunctions, you should attempt to correct or isolate the trouble before concluding that

SPECIFICATIONS AND FEATURES Receiver Operating Frequencies: Receiver Type: Diversity Method: Frequency Stability: Front end selectivity: IF Select

Diversity UHF Receiver15Rio Rancho, NM USA–

LIMITED ONE YEAR WARRANTYThe equipment is warranted for one year from date of purchase against defects in materials or workmanship provided it was pur

Table of Contents INTRODUCTION TO THE 195 SYSTEM ... 4 GENERAL TECHNICAL DESCRIPTION UCR195 RECEIVER

INTRODUCTION TO THE 195 SYSTEM The 195 Series system was designed for the most critical studio and sound reinforcement applications. The system desi

Diversity UHF Receiver NO PRE-EMPHASIS/DE-EMPHASIS The signal to noise ratio of the 195 system is high enough to preclude the need for conventional pr

GENERAL TECHNICAL DESCRIPTION UCR195 RECEIVER The UCR195D is a high performance, dual-conversion, UHF receiver. The RF performance is extremely sta

Diversity UHF Receiver DIGITAL PULSE COUNTING DETECTOR The UCR195D receiver uses an advanced digital pulse counting detector to demodulate the FM sign

-FRONT PANEL CONTROLS AND FUNCTIONS PWR LED POWER SWITCH When lit, this LED indicates that power is applied to the UCR195D and adequate voltage is

Diversity UHF Receiver REAR PANEL CONTROLS AND FUNCTIONS EXTERNAL POWER JACK The UCR195D can be powered from external 12 to 18 Volts DC applied dire